Tetran (Lurker) View all posts in this topic  
Mon Nov 09, 2015 8:06 am
no spark after top end swap        

Hey again, everyone. I recently did a head swap after my old one became too stripped to hold a spark plug. I have put it all together, torqued everything to spec, and done a valve adjustment. I put a spark plug in the boot and held it up to the motor while it cranked, no spark. Not even a weak spark. I checked my connections, but the only wires I messed with were the coils, and I put all of them back on, reds bottom blacks top. I am at my wits end with this bike, I'm considering just scrapping it. If anyone could help, i would appreciate it.

 Post a Response | Reply with quote | Return To Forum 
View next topic View previous topic

Powered by phpBB © 2001, 2005 phpBB Group