Ninja250 Riders Club Forum Index
Ninja 250 Quest
TrackDays and Racing
I confirm this is not spam
Posted: Sun Oct 02, 2011 11:58 pm
i haven't seen 14, 15, 16 in use since I did track in 2010
Posted: Sun Oct 02, 2011 11:13 pm
Are all 16 turns usually used for track days?
Or how has it been set up for the track days you have done (and with what company)?
Posted: Sat Mar 26, 2011 10:42 am
Posted: Sat Mar 26, 2011 1:09 am
He is asking about Streets
Which is where the cars were on our track day. We were on Willow Springs
Posted: Sat Mar 26, 2011 12:11 am
What I did
IIRC, I'd upshift coming out of 2 and redline it all the way to 3 then hold that gear all the way up and over into the 4-5-6 section. I know I shifted again somewhere after 4, but don't recall exactly where.
Posted: Thu Dec 09, 2010 2:26 am
anyone on did Streets of Willow? (how do you guys take turn 3)
After exiting Turn 2, i am in 2nd gear with wide open throttle down toward Turn 3, but around halfway before the turn in point, i am already redlining. I currently have two options, with both I think are not the best approach:
1) up shift to 3rd, go deeper into the turn to build up more RPM, then brake and turn in.
2) keep throttle bouncing off the redline or hold it steady near the redline until the braking point and then turn in.
I like 2) better because I get to finish turn 3 more smoothly, with option 1), i am risking running too wide, or lack of RPM/power to carry me out of the turn should i turn in earlier.
I am running stock gearing, should I up one tooth in the front sprocket?
All times are GMT - 5 Hours
© 2001, 2005 phpBB Group