kiizerdrigs |
Posted: Sat Feb 18, 2012 4:17 pm
Subject: the panels on the side of the headlight... |
|
kiizerdrigs wrote: |
i know the mount stands out like a sore thumb on the front im going to paint it and resize the bushings i made for the turning signals later when its not raining. still lookin for a new headlight and gauges to replace the current set up but at least its cleaned up a bit. what do you think so far? |
i fashioned the pannels on the sides of the headlight out of the scraps from the rear fender lol it's amazing what you can do with a dremel tool and some imagination right:D |
|
 |
kiizerdrigs |
Posted: Sat Feb 18, 2012 4:13 pm
Subject: some more progress pics |
|
i know the mount stands out like a sore thumb on the front im going to paint it and resize the bushings i made for the turning signals later when its not raining. still lookin for a new headlight and gauges to replace the current set up but at least its cleaned up a bit. what do you think so far? |
|
 |
kiizerdrigs |
Posted: Fri Feb 17, 2012 6:58 pm
Subject: Front of the bike |
|
Bokonon wrote: | What are you doing about the front of the bike? Hope it doesn't involve keeping the stock gauges. Will definitely work, but not terribly beautiful |
I have been shopping around for a new gauge set up and for the headlight I'm thinking of putting a 7" round on. I'm trying to keep the front end with a very clean look to it so I'm being picky about the next step. I fabricated the mounts for my front turn signals today and I'm going to try and get them mounted tonight. I'll put up some daylight pics tm. Until I can find a new gauge assembly and light I'm going to mount the existing setup to my forks so I can at least ride it again. I had alot of setbacks today it seems like nobody in GA carries headlights so I gota wait it seems. Any advice on how to go about the front end?? |
|
 |
Bokonon |
|
 |
kiizerdrigs |
Posted: Fri Feb 17, 2012 12:15 am
Subject: I definitely do need tires... |
|
Taxes come in on Tuesday so maybe I'll get it done then if I can ever get my front turning signals mounted |
|
 |
Bokonon |
Posted: Thu Feb 16, 2012 9:16 pm
Subject: Use IMG Code instead |
|
First, though, I hope you're planning on new tires real soon.
https://faq.ninja250.org/wiki/Tires
For images, this:
Code: | [IMG]http://i1247.photobucket.com/albums/gg637/kiizerdrigs/Snapbucket/CD921663.jpg[/IMG] |
Gives you this:
|
|
 |
BrianM |
|
 |
kiizerdrigs |
|
 |
kiizerdrigs |
|
 |
kiizerdrigs |
Posted: Wed Feb 15, 2012 11:30 pm
Subject: day 1 of converting my 2004 to a streetfighter! |
|
today i took off the upper and lower fairings and re-ran the turning signal lights up thru the empty pods. i was able to salvage the original bulbs and wires from the original turning signals. i cleaned up the wires with a couple of zip ties and flush cut the fender. im thinking about useing the scraps left over from the fender to mak the license plate holder tm. now i just need to get the front turning signals and ill be street legal again. ill get some daytime pics up soon:D
|
|
 |