Ninja250 Riders Club :: View Forum - Classic Ninja 250

Register | Log in

Ninja250RC Forum


Forum Index > Classic Ninja 250					Mark all topics read

Announcement: All new users, please read this before posting — IanJ, Wed Apr 05, 2006 7:02 pm Announcement: ATTN: New Riders (and old timers) — KarlP, Thu Mar 31, 2005 2:20 pm Bent handlebar — gib, Wed Jan 15, 2025 4:17 pm solved — gib, Wed Jan 15, 2025 6:21 pm (n/t) — MIK, Thu Jan 16, 2025 9:23 am BTW — gib, Wed Jan 15, 2025 4:21 pm Gpx/ex 250 — Ade, Fri Nov 22, 2024 9:29 pm Sounds like an incomplete carb clean as the root of it all... — BrianM, Sat Nov 23, 2024 7:47 am Ebay Carbs - Experienced wrenches please — How2, Sun Nov 05, 2023 1:40 pm ebay carb seems to work alright — joon, Thu Nov 21, 2024 12:57 pm WOW - link please! (n/t) — Wes, Thu May 16, 2024 2:04 pm main jet size — Jorgex, Fri Dec 15, 2023 10:40 pm Hanging Idle caused by hole in valve cover? — bokchoymaster69, Wed Nov 20, 2024 3:27 am Erm, in short, no. — BrianM, Wed Nov 20, 2024 9:57 am Vacuum leak — jkv45, Wed Nov 20, 2024 9:49 am igniter compatibility — Rldsl, Tue Oct 08, 2024 10:36 pm igniter compatibility — Wes--, Sat Nov 09, 2024 8:06 am Unknown Issue with 2004 250R — madmaxjb, Thu Aug 15, 2024 9:30 pm Tank, battery — jkv45, Fri Aug 16, 2024 9:52 am Issue fixes — madmaxjb, Fri Aug 16, 2024 10:26 pm Carbs — jkv45, Mon Aug 19, 2024 9:47 am Carbs Reply — madmaxjb, Mon Aug 19, 2024 12:39 pm Air filter — jkv45, Mon Aug 19, 2024 2:58 pm airfilter — MIK, Mon Aug 19, 2024 2:57 pm sparks — MIK, Sat Aug 17, 2024 8:14 pm Bike cranks good, will not start — GiveMeSomeName, Tue Jul 02, 2024 6:46 pm Note — GiveMeSomeName, Tue Jul 02, 2024 6:47 pm If you have original gas line — MIK, Mon Jul 15, 2024 6:30 pm Fuel filters — jkv45, Tue Jul 16, 2024 11:51 am Tank — jkv45, Mon Jul 08, 2024 10:38 am How to fix your banging clutch damper — amjhstn, Fri Dec 23, 2011 1:04 am So, you have a 1986-1987 Ninja 250. Whats different? — kurbycar32, Wed Jul 13, 2005 12:45 pm if anyone is still around!! just got two of these bikes both 87 — Gponz, Sat May 11, 2024 3:29 am Re: if anyone is still around!! just got two of these bikes both 87 — Wes, Thu May 16, 2024 2:08 pm The handlebar risers are lower, IIRC. (n/t) — Jim Race, Thu Dec 29, 2005 12:16 am and they point at a lesser angle and NOT interchangable — kurbycar32, Thu Dec 29, 2005 12:33 am The carbs are 32mm vice the 30mm on 89 and up (n/t) — Phil in San Diego, Sun Aug 07, 2005 3:40 pm good to know, il research it and do a section on the carbs. thanks! (n/t) — kurbycar32, Fri Sep 02, 2005 11:38 am For some reason the '86 looks MORE MODERN than the '05 (n/t) — cjc, Wed Jul 13, 2005 3:55 pm Why do you say that? It doesn't strike me that way... — loudboys, Wed Jul 13, 2005 5:54 pm I think the tail looks alot more modern. At least cooler. (n/t) — MItchell Taft, Mon Aug 08, 2005 1:11 am Bike looks great and some really good info. (n/t) — saynotopark, Wed Jul 13, 2005 1:24 pm Good write up and good job on that bike! (n/t) — MIK, Wed Jul 13, 2005 1:14 pm Re: So, you have a 1986-1987 Ninja 250. Whats different? — Marylin, Wed Jul 13, 2005 1:05 pm Re: So, you have a 1986-1987 Ninja 250. Whats different? — kurbycar32, Wed Jul 13, 2005 4:37 pm Electrical Damage After "Incorrect" Crankshaft Turning — moderately_irate, Fri Mar 15, 2024 2:16 am Re: Electrical Damage After "Incorrect" Crankshaft Turning — Wes, Thu May 16, 2024 2:04 pm what about ignition coils? Are those ok? — MIK, Sat Mar 16, 2024 9:38 pm I'm back after 13 years! — ReDnEcK, Mon Sep 04, 2023 10:00 pm Whoah -- has it really been that long?! (n/t) — Wes, Thu May 16, 2024 1:59 pm Pic — ReDnEcK, Mon Sep 04, 2023 10:24 pm beautiful! (n/t) — Jorgex, Fri Sep 15, 2023 1:01 am Perspective — GeorgeRYoung, Tue Sep 05, 2023 9:05 am Calculator — MIK, Mon Sep 04, 2023 11:10 pm MIK — ReDnEcK, Mon Sep 04, 2023 11:59 pm Paying it forward from 2010 - free parts to whoever wants th — lunchmeat, Sun Feb 18, 2024 3:21 pm Re: Paing it forward from 2010 — notaroboto, Sun Apr 07, 2024 12:06 am Very nice! I hope someone will get it (n/t) — MIK, Tue Feb 27, 2024 5:25 pm Cold start issues... — bennylupid, Thu Feb 29, 2024 7:01 pm Also — MIK, Mon Mar 04, 2024 5:36 pm On Valves... — bennylupid, Thu Mar 07, 2024 5:17 pm What about valves? Have you checked those? (n/t) — MIK, Mon Mar 04, 2024 5:33 pm Idle Issue — lake_harley, Mon Jul 24, 2023 6:13 pm Idle issue update — lake_harley, Tue Jul 25, 2023 6:45 pm '04 Brake Light Fuse Blown — duck749, Thu Jul 20, 2023 10:08 am Slow Return To Idle — captainlarry, Tue May 23, 2023 1:32 pm Vacuum leak — jkv45, Sun Jun 11, 2023 9:29 am Warped head? — TiltedFish, Sun Oct 30, 2022 6:12 pm update — TiltedFish, Sun Apr 30, 2023 7:03 pm (n/t) — MIK, Sun Apr 30, 2023 7:09 pm I am sure a machine shop can do it; Question of price and effort. (n/t) — MIK, Fri Nov 04, 2022 8:11 am My '03 Ninja 250 — Leon, Wed Dec 15, 2021 7:51 pm Took a test ride today — Leon, Mon Oct 24, 2022 4:11 pm Carb fixes — Leon, Fri Dec 30, 2022 7:07 pm Went one more size up on the main jet. — Leon, Tue Apr 04, 2023 9:39 pm Got a title now rebuilding the bike — Leon, Sun Jul 31, 2022 11:02 am Any shot you got a spare fuel tank? Adam (n/t) — Adam Bailey, Tue Aug 02, 2022 2:23 am Nice bike; Looks like a neat one overall! (n/t) — RickyJT, Wed Mar 09, 2022 2:08 am Engine is good! — Leon, Tue Feb 15, 2022 6:10 pm Progress on getting a title — Leon, Sun Dec 19, 2021 10:38 am (n/t) — MIK, Wed Dec 15, 2021 7:57 pm 2007 ex250 — ThatGuyInTheKilt, Fri Jan 13, 2023 8:47 pm The S- shaped hose is for PCV — Leon, Tue Apr 04, 2023 9:34 pm how much fluid? — Jorgex, Mon Jan 16, 2023 6:27 pm Help with LED indicators — foxboy, Wed Mar 08, 2023 4:29 pm Use a good ground point — foxboy, Wed Mar 08, 2023 11:07 pm Wiki — MIK, Mon Mar 13, 2023 2:55 pm Wiki is read-only — foxboy, Wed Mar 08, 2023 11:11 pm Clutch lever bracket — MikeCL, Sat Jan 07, 2023 3:40 pm From light research,... my guess would be no without modifications. (n/t) — Jorgex, Sun Jan 08, 2023 11:16 pm I ordered a used one to check (n/t) — MikeCL, Thu Jan 12, 2023 3:05 pm It works fine! (n/t) — MikeCL, Tue Jan 17, 2023 8:04 am Hi All - 250s for Sale — Duke Dunsford, Tue Nov 22, 2022 1:48 pm Your two Ninjas — Leon, Fri Dec 30, 2022 3:15 pm Hey Duke! — MIK, Sat Nov 26, 2022 6:10 pm First bike, project bike. A few questions — Jorgex, Fri Oct 28, 2022 4:55 pm Have you checked parts diagram? — MIK, Fri Nov 04, 2022 8:22 am other issues — Jorgex, Fri Nov 04, 2022 9:06 pm A newer engine would probably be a better choice — MIK, Sat Nov 05, 2022 5:20 pm 07 ninja 250 idles then stalls — samgharts, Sun Oct 30, 2022 2:06 pm Mechanic — jkv45, Mon Oct 31, 2022 11:26 am 2000 Gas Tank 3 Lines Bottom of Tank — Jorgex, Mon Oct 24, 2022 10:24 pm Is that a california spec bike? — MIK, Tue Oct 25, 2022 11:09 am Missing emission devices — Jorgex, Tue Oct 25, 2022 2:44 pm Airbox Cover Mod - increase intake area 250% — floggolf, Sun Feb 24, 2013 3:00 am Repost photos — floggolf, Wed Oct 19, 2022 1:18 am An How ! — johnny62, Sat Mar 02, 2013 8:31 pm Compared to the POD filters... — floggolf, Sat Mar 02, 2013 11:29 pm An How ! — johnny62, Sat Mar 02, 2013 8:31 pm did you feel the carb need to be re-jet? (n/t) — andylawcc, Mon Feb 25, 2013 4:28 pm Bike had a "Crippling lean stumble" as noted in the post. — floggolf, Mon Feb 25, 2013 11:07 pm 2007 ninja aftermarket windshields — Richard v, Mon Oct 17, 2022 12:05 pm just factory clones — floggolf, Tue Oct 18, 2022 1:55 am 2007 ninja aftermarket windshields — Richard v, Tue Oct 18, 2022 6:31 am Egads, man! — floggolf, Tue Oct 18, 2022 6:11 pm Any way to avoid annual carb cleaning? — SQLGuy, Sun Jun 19, 2022 2:37 pm Carbs — jkv45, Mon Jun 20, 2022 10:35 am HFT Vacuum pump — floggolf, Mon Oct 17, 2022 6:08 pm Runs great now — SQLGuy, Sun Jun 19, 2022 4:24 pm draining the carbs — GeorgeRYoung, Mon Jun 20, 2022 7:03 pm +1 to that (n/t) — MIK, Thu Jun 23, 2022 10:57 am Found a source for 130/80-16 scooter tire — floggolf, Mon Oct 17, 2022 12:49 am Shinko tires — Richard v, Mon Oct 17, 2022 12:13 pm My 2007 with 6000 miles slow acceleration — Richard v, Thu Jun 30, 2022 5:04 am I ran it without the air cleaner and no change. I will check the plugs. (n/t) — Richard v, Thu Jun 30, 2022 9:49 am Carbs — jkv45, Thu Jun 30, 2022 8:47 am Thanks (n/t) — Richard v, Thu Jun 30, 2022 9:42 am My 2007 with 6000 miles slow acceleration — Richard v, Mon Oct 17, 2022 11:33 am Long time no post — AJinNoHills, Sat Aug 06, 2022 12:48 am Ditto - Long time no post — floggolf, Mon Oct 17, 2022 12:33 am Welcome back! — jkv45, Mon Aug 08, 2022 10:15 am (n/t) — MIK, Sat Aug 06, 2022 6:11 am Front Fork Oil Question — Swaglord9000, Fri Sep 30, 2022 12:59 pm Emulators — jkv45, Fri Sep 30, 2022 1:33 pm RE: Check with Manufacturer — Swaglord9000, Fri Sep 30, 2022 10:23 pm Basic info — jkv45, Sun Oct 02, 2022 9:55 pm Mismatched case halves? — mykrowyre, Sun Aug 21, 2022 4:58 am nope — mykrowyre, Sun Aug 21, 2022 5:17 am 1994 eliminator 250 compression issues — Grasshopper645, Sat Jan 09, 2021 5:39 pm Still having issues — Grasshopper6455, Tue Nov 02, 2021 8:15 am Cam timing — jkv45, Tue Nov 02, 2021 8:59 am timing/valve issue — grasshopper6455, Tue Nov 02, 2021 7:50 pm If compression is low — MIK, Thu Jan 14, 2021 3:40 pm Ok — Grasshopper6455, Thu Jan 14, 2021 3:54 pm Is it possible that a cylinder wall is worn and there is no good seal — MIK, Thu Jan 14, 2021 4:03 pm I guess, it is also possible that valves are not sealing either — MIK, Thu Jan 14, 2021 4:11 pm If you are doing a compression test — MIK, Thu Jan 14, 2021 4:17 pm update — Grasshopper6455, Thu Jan 14, 2021 4:16 pm update — Grasshopper6455, Thu Jan 14, 2021 4:07 pm update — its toasted, Mon Jun 20, 2022 9:12 pm . — Grasshopper645, Sat Jan 09, 2021 5:45 pm Valve adjustment noise — Cvvbin, Wed May 11, 2022 3:30 pm CCT — jkv45, Thu May 12, 2022 9:48 am Cct — Cvvbin, Thu May 12, 2022 11:07 am CCT — jkv45, Thu May 12, 2022 12:32 pm Valve adjustment; Also have about 150 miles on the adjustment (n/t) — Cvvbin, Wed May 11, 2022 3:47 pm how i do it — its toasted, Mon Jun 20, 2022 9:00 pm 2005 — gogiburn, Sun May 29, 2022 4:42 pm Carb part problem - black plastic elbow piece — bencastaneda, Wed Jun 08, 2011 11:52 pm fuel inlet fitting — AP, Thu Jun 09, 2011 3:31 am Fuel Inlet elbow — JamminJimmy, Sun May 08, 2022 8:13 am Where do you come up with this stuff? — Bokonon, Thu Jun 09, 2011 3:41 am edit: they work — AP, Thu Jun 09, 2011 4:00 am Press fitted — MrMark, Thu Jun 09, 2011 9:15 am another link — AP, Thu Jun 09, 2011 11:20 am I wouldn't drill it out — AP, Thu Jun 09, 2011 10:19 am Not listed — BobA, Thu Jun 09, 2011 12:20 am Can't seem to find tires in stock anywhere — arosen32, Thu Apr 21, 2022 11:06 pm I am sure you can find some online — MIK, Tue Apr 26, 2022 6:47 pm Fastener Tightness Check Recommendations — CadeConnelly, Mon May 17, 2021 1:31 pm Sidestand bracket — CadeConnelly, Fri Mar 25, 2022 2:57 pm GVE Wiki Incorrect? — DrLightbulb, Wed Mar 16, 2022 4:18 am Should the Sleeves be Cut Down? — DrLightbulb, Wed Mar 16, 2022 5:04 am Re: should the sleeves be cut down — GeorgeRYoung, Fri Mar 18, 2022 11:18 am Thanks. Post the proposed changes — MIK, Fri Mar 18, 2022 10:31 am Re: proposed changes — GeorgeRYoung, Fri Mar 18, 2022 11:28 am

Classic Ninja 250		Topics	Posts	Last Post
	ZZR 250 Technical forum for issues specific to Canadian Ninja 250/EX250-H 2000-2007 Moderators Global Moderators, Bike Forums Moderators	125	768	Mon Apr 25, 2016 7:55 pm willowglenn
	Streetfighter Project Moderators M, Global Moderators, Bike Forums Moderators	178	1554	Wed Jun 23, 2021 9:47 am drensore

Page 1 of 1377
Goto page 1, 2, 3 ... 1375, 1376, 1377 Next

Powered by phpBB © 2001, 2005 phpBB Group