twostrokemike (Lurker)  |
| Sat Mar 08, 2008 3:23 pm |
| Re: clip-ons/lowered risers; anybody install one yet? |
Does anybody know, how much the 37mm inner fork-pipes are reaching out
on top of the upper front-fork-holder????
(A pic would be great - because in the parts-diagram - it's in parts....)
I'm planning too, to change the handlebars - and there are quite a few
companies dealing with this stuff in Europe, but as we still don't have any
bikes over here - I want to prepare, so that I can start to change, the
day, they arrive.
(My NINJA650 has lower bars too - and for me it's great - because I'm
riding a lot on race-bicicles - and there the bars are really very low!!!)
Thanks for your help !!!! Mike
|
|
|
clip-ons/lowered risers; anybody install one yet? (n/t) — Hottdawg627, Sat Mar 08, 2008 9:25 am -
It certainly needs it. Bars way too high for sportsbike IMO — TCooper, Sat Mar 08, 2008 7:48 pm
-
Re: It certainly needs it. Bars way too high for sportsbike IMO — BrianM, Sat Mar 08, 2008 8:44 pm
-
What is a sport bike? (n/t) — munro, Sun Mar 09, 2008 8:53 am
-
These days it's mostly seating position — Ivan, Sun Mar 09, 2008 9:04 am
-
Re: These days it's mostly seating position — munro, Sun Mar 09, 2008 9:16 am
-
Re: These days it's mostly seating position — twostrokemike, Sun Mar 09, 2008 9:59 am
-
sorry for going off topic
(n/t) — munro, Sun Mar 09, 2008 10:27 am
-
Re: clip-ons/lowered risers; anybody install one yet? — twostrokemike, Sat Mar 08, 2008 3:23 pm
-
Could someone take the measure ??? — twostrokemike, Sun Mar 09, 2008 7:19 am
-
Could someone take the measure ??? (n/t) — twostrokemike, Sun Mar 09, 2008 7:16 am
-
Re: clip-ons/lowered risers; anybody install one yet? — Marcello, Sat Mar 08, 2008 4:56 pm
-
woodcraft has 37mm clip ons!! does anyone know if that one fits? (n/t) — Hottdawg627, Sat Mar 08, 2008 8:35 pm
-
Re: clip-ons/lowered risers; anybody install one yet? — twostrokemike, Sat Mar 08, 2008 5:41 pm