JinkProject (guest)  |
| Sat Jun 20, 2009 5:05 pm |
| What the hell is this screw? |
I was changing the oil the other day and accidentally unscrewed this screw instead of the drain screw. Oil drained out of it, but what I want to know is:
1) What the heck is it?
2) Why does it not tighten all the way?
3) Why does oil continue to leak from this screw?
ps - It's the screw on the right of the oil filter bolt.
|
|
|
What the hell is this screw? — JinkProject, Sat Jun 20, 2009 5:05 pm -
In the owner's manual... — loudboys, Sun Jun 21, 2009 11:55 am
-
Re: In the owner's manual... — jink, Sun Jun 21, 2009 4:21 pm
-
Videos? VIDEOS? — loudboys, Sun Jun 21, 2009 7:32 pm
-
Re: Videos? VIDEOS? ---- are crap — carsnwomen91, Wed Jun 24, 2009 11:24 pm
-
Re: Videos? VIDEOS? ---- are crap — JinkProject, Wed Jun 24, 2009 11:34 pm
-
Re: Videos? VIDEOS? — jink, Sun Jun 21, 2009 8:08 pm
-
There is another solution... — ToolMaker, Sun Jun 21, 2009 12:52 am
-
Re: There is another solution...; — JinkProject, Wed Jun 24, 2009 8:16 pm
-
Re: There is another solution...; — ToolMaker, Thu Jun 25, 2009 12:45 pm
-
Re: There is another solution...; — jink, Thu Jun 25, 2009 7:59 pm
-
Re: There is another solution...; — ToolMaker, Fri Jun 26, 2009 12:05 am
-
Re: There is another solution...; — jink, Fri Jun 26, 2009 2:27 am
-
Re: There is another solution...; — djrussell, Thu Jun 25, 2009 1:06 pm
-
Re: There is another solution...; — jink, Thu Jun 25, 2009 7:54 pm
-
Re: There is another solution... — Wes, Sun Jun 21, 2009 10:05 am
-
Re: There is another solution... — ToolMaker, Sun Jun 21, 2009 1:58 pm
-
You stripped the threads, re-tap the case to fix it... (n/t) — M, Sat Jun 20, 2009 11:00 pm
-
Re: What the hell is this screw? — Wes, Sat Jun 20, 2009 5:17 pm
-
Re: What the hell is this screw? — JinkProject, Sat Jun 20, 2009 6:02 pm
-
This has FAIL written all over it... — chocalotstarfish, Sat Jun 20, 2009 10:29 pm
-
Re: This has FAIL written all over it... — JinkProject, Sat Jun 20, 2009 10:40 pm
-
Are you trying to fix stripped bolt with liquid gasket? — MIK, Sun Jun 21, 2009 1:57 pm
-
You can't really be this thick, can you? — Wes, Sun Jun 21, 2009 9:53 am
-
Re: You can't really be this thick, can you? — jink, Sun Jun 21, 2009 4:48 pm
-
I'm sure you will do even better with the 636 — Urban Guerrilla, Sun Jun 21, 2009 5:09 pm
-
Re: I'm sure you will do even better with the 636 — jink, Sun Jun 21, 2009 6:01 pm
-
Food for thought — Urban Guerrilla, Sun Jun 21, 2009 6:40 pm
-
Re: Food for thought — jink, Sun Jun 21, 2009 8:12 pm
-
Re: Food for thought — MIK, Mon Jun 22, 2009 11:52 am
-
Here's your enlightenment, you're half-assing a poor stop-gap 'fix' (n/t) — M, Sat Jun 20, 2009 11:00 pm
-
Re: Here's your enlightenment, you're half-assing a poor stop-gap 'fix' — JinkProject, Sat Jun 20, 2009 11:47 pm
-
Let us know, with detailed pics of your debacle... (n/t) — M, Sat Jun 20, 2009 11:52 pm
-
i love the optimism. keep it up. (n/t) — JinkProject, Sun Jun 21, 2009 12:37 am
-
Thinking you can fix it is optimistic. — Bokonon, Sun Jun 21, 2009 1:16 am
-
Re: Thinking you can fix it is optimistic. — JinkProject, Sun Jun 21, 2009 1:51 am
-
If you don't want feedback, don't post — Urban Guerrilla, Sun Jun 21, 2009 10:09 am
-
You act as though you believe you are an expert mechanic — Wes, Sun Jun 21, 2009 10:00 am
-
Re: You act as though you believe you are an expert mechanic — JinkProject, Sun Jun 21, 2009 3:30 pm
-
Caulk is what you use around windows...
— M, Sun Jun 21, 2009 3:58 pm -
Re: You act as though you believe you are an expert mechanic — loudboys, Sun Jun 21, 2009 3:57 pm
-
Re: You act as though you believe you are an expert mechanic — jink, Sun Jun 21, 2009 4:18 pm
-
Re: You act as though you believe you are an expert mechanic — ToolMaker, Sun Jun 21, 2009 7:01 pm
-
Re: You act as though you believe you are an expert mechanic — jink, Sun Jun 21, 2009 8:06 pm
-
please clarify which bolt you're talking about. — djrussell, Sun Jun 21, 2009 10:36 pm
-
Re: please clarify which bolt you're talking about. — JinkProject, Sun Jun 21, 2009 10:57 pm
-
got it. n/m (n/t) — djrussell, Mon Jun 22, 2009 4:08 pm
-
Re: You act as though you believe you are an expert mechanic — ToolMaker, Sun Jun 21, 2009 10:17 pm
-
Re: You act as though you believe you are an expert mechanic — JinkProject, Mon Jun 22, 2009 6:52 pm
-
Have you ever heard of a 'tap'? — AlanS, Mon Jun 22, 2009 6:54 pm
-
Re: Have you ever heard of a 'tap'? — JinkProject, Mon Jun 22, 2009 6:59 pm
-
Re: i'm an electrical engineer, not a mechanic — Urban Guerrilla, Mon Jun 22, 2009 11:11 pm
-
How in earth did you pass basic kinematics? — AlanS, Mon Jun 22, 2009 7:26 pm
-
Re: How in earth did you pass basic kinematics? — JinkProject, Mon Jun 22, 2009 7:28 pm
-
There should be detailed posts on this web site if he searches hard enough (n/t) — Wes, Mon Jun 22, 2009 11:32 am
-
I'm Interested to know how the caulk works. — SmartAssWhizKidd, Sat Jun 20, 2009 7:33 pm
-
Re: I'm Interested to know how the caulk works. — JinkProject, Sat Jun 20, 2009 10:37 pm
-
*caulk in the area between (n/t) — JinkProject, Sat Jun 20, 2009 6:22 pm