smokinsuki (guest) View all posts in this topic  
Sun Sep 13, 2009 5:15 pm
Re: New Paint Job for the 250        

When I got back from Iraq I found my bike had ben laid down on each side. First i pulled all the body work (it was all black) then sanded it all smoth. I had to go quite far in some places so I used spray filler primer to build it back up. I then used 8 cans of white spray paint to get a good coat on it then used painters tape to make the paterns then 3 cans of floresent orange paint. Sealed it with 4 cans of clear coate. Total cost was about 90 dollars. All of the paint was done outside on a hanger on some string. Not in the pics are the costome sliders spools and bar ends they came to 200 after shiping. Anybody can do it. I was going for an old moto GP look. Next will be my friends CBR F4I it should be done this month. It took me two weeks to get the Ninja done, that is a hard patern to do by hand.

 Post a Response | Reply with quote | Return To Forum 
View next topic View previous topic


Powered by phpBB © 2001, 2005 phpBB Group