FerventPiranha (Lurker)  |
| Tue Apr 24, 2012 12:35 pm |
| exact same |
I just installed that exact same headlight on my bike a week ago. I removed the stock headlight, and mounted the new one in the lower set of ears/brackets from the top fairing stay. It fits fine, has no clearance issues, etc., but you should fabricate a bracket to keep it adjusted down/up. The headlight itself adjusts left/right via a spring-mounted bolt, but the up/down is a channel on the back left of the light. I'll throw up pictures of the one I made, but it's a pain as the up/down channel is on the same side as the stock gauge's speedo cable, so the routing of the bracket is tough.
|
|
|
8" Headlight? — Ongaku, Fri Apr 20, 2012 8:19 pm -
exact same — FerventPiranha, Tue Apr 24, 2012 12:35 pm
-
a little more detail — FerventPiranha, Tue Apr 24, 2012 12:39 pm
-
The electrical isn't your problem. — Bokonon, Fri Apr 20, 2012 8:57 pm
-
Naked already, Flush mounts, and Stock Brackets — Ongaku, Fri Apr 20, 2012 10:20 pm