FerventPiranha (Lurker) View all posts in this topic  
Tue Apr 24, 2012 12:35 pm
exact same        

I just installed that exact same headlight on my bike a week ago. I removed the stock headlight, and mounted the new one in the lower set of ears/brackets from the top fairing stay. It fits fine, has no clearance issues, etc., but you should fabricate a bracket to keep it adjusted down/up. The headlight itself adjusts left/right via a spring-mounted bolt, but the up/down is a channel on the back left of the light. I'll throw up pictures of the one I made, but it's a pain as the up/down channel is on the same side as the stock gauge's speedo cable, so the routing of the bracket is tough.

 Post a Response | Reply with quote | Return To Forum 
View next topic View previous topic

Powered by phpBB © 2001, 2005 phpBB Group